Fused Deposition Modeling

Fused Deposition Modeling (FDM) is an additive manufacturing technique that builds three-dimensional objects layer by layer from a digital design, making it important for rapid, customized fabrication. During printing, thermoplastic filament is heated until it softens, extruded through a nozzle, and deposited along programmed paths; the material cools and solidifies to form successive layers. In bioengineering, FDM supports the production of anatomical models, laboratory devices, and customized components, while selected biocompatible or biodegradable polymers can support tissue-engineering research. Control of temperature, layer thickness, infill, and print speed influences structural accuracy, mechanical behavior, and suitability for biological applications.

Fused Deposition Modeling - Related Videos

Education

JoVE Core - Electrical Engineering

Reclosers and Fuses

0 Views •

2024

Automatic circuit reclosers enhance the protection of distribution circuits by interrupting and auto-reclosing an AC circuit according to a preset sequence. They effectively manage temporary faults on overhead distribution lines, often caused by tree limbs or wildlife, by briefly disrupting service to improve overall reliability. However, contact with reclosers or energized broken conductors on the ground can pose serious hazards. A comprehensive protection scheme for radial distribution...

Research

JoVE Journal - Chemistry

Depolymerizable Olefinic Polymers Based on Fused-Ring Cyclooctene Monomers

0 Views •

2022

Here, we describe protocols for the preparation of trans-cyclobutane fused cyclooctenes (tCBCO), their polymerization to prepare depolymerizable olefinic polymers, and the depolymerization of these polymers under mild conditions. Additionally, protocols for the preparation of depolymerizable networks and compression molding of rigid linear plastics based on this system are described.

Circuit Breaker and Fuse Selection

0 Views •

2024

A circuit breaker is a device engineered to interrupt fault currents and sometimes reclose automatically. When a fault current is detected, the breaker separates the electrical contacts, which generates an arc. This arc is extinguished by methods such as elongation, cooling, or splitting, depending on the breaker's design. Breakers are categorized based on the voltage they operate at and the medium used for arc extinction, such as air, oil, SF6 gas, or vacuum. In high-voltage systems, circuit...

Research

JoVE Journal - Engineering
Free Sample

Fused Filament Fabrication (FFF) of Metal-Ceramic Components

0 Views •

Cited by 92 •

2019

This study shows multi-material additive manufacturing (AM) using fused filament fabrication (FFF) of stainless steel and zirconia.

Formation of Thick Dense Yttrium Iron Garnet Films Using Aerosol Deposition

0 Views •

Cited by 7 •

2015

This report describes the use of a custom-built system to perform aerosol deposition of thick films of yttrium iron garnet onto sapphire substrates at RT. The deposited films are characterized using scanning electron microscopy, profilometry, and ferromagnetic resonance to give a representative overview of the capabilities of the technique.

View All Results

FAQs

Related Topics